Connect with us

Smart Home

Netflix wants to end shared accounts and this is all it has done so far to achieve it in 2023

Avatar of Thomas Grimm

Published

on

1671781081 840 560 jpeg

The year that we are about to end has been a year in which we have seen important changes in the streaming landscape. The platforms have decided to raise prices (some facing 2023) with advertising as the only method to lower their rates. The best example is Netflix and its plan with ads that left such a bitter taste in our mouths.

And if 2022 has been moved, 2023 is also presented as a year in which we will see news and Netflix is ​​once again in the eye of the hurricane. Shared accounts are the next castle to tear down and this is all we know so far about the plan that Netflix will carry out to achieve this.

2022: goal shared accounts


The latest information comes from an article in the prestigious newspaper The Wall Street Journal announcing that Netflix will begin cutting shared accounts beginning of 2023 in the United States. In fact, it is something that it has already communicated to its investors in a document.

“Netflix has said it will end that agreement starting in 2023, asking people who share accounts to pay to do so. The company hopes to start implementing this change in the United States at the beginning of the year.”

It is not, however, a new movement, since in some Latin American countries, Netflix He has already been rehearsing this practice. They have tested it in Argentina, Honduras, Guatemala, El Salvador and the Dominican Republic, markets in which the platform launched “Hogar Netflix”. The objective was to prevent users who lived outside the main house from being able to use the service with a shared password and without paying.

The problem with this system is that it was not easy to determine when the account was being shared by a user who lived away from home. The reason is that the company relied on the history of the accounts, their IP addresses and device identifiers. The problem is to consider what is considered an address if, for example, in a second residence, a job or in a hotel, a user occurs to access their Netflix account.

Netflix

In fact, a verification system was even established to change homes in the event that the users of the main house were traveling and that the company made users who shared an account have to pay an “extra”.

In Peru, for example, they had to pay 8 soles (2 euros) per month for each of these ‘extra’ users.

Thus, the company faced problems when it came to accurately determining the location in which the users were, something that also, clashed with use via mobile devices. Both reasons sufficient to stop the implementation of this measure worldwide until now, although it seems that from the company they already have the solution according to what was reported by TWSJ.

Netflix

Without further details about it, for now what seems to be clear is that the system will begin to be implemented in early 2023. For now, the company, which everything indicates that it will be the pioneer in charging for shared accounts, seems to be clear that the solution involves identification by IP and in the event that there are several IPs, an extra charge would be charged for each of them. they.

How to use Netflix profile transfer so you don't lose your account activity if you switch

It is clear that Netflix will end up applying this systemand in fact we have already seen how they have implemented the first mechanism to make it possible, allowing profile transfer for those users who want to start using an account independently.

Via | The Wall Street Journal

Advertisement
Continue Reading
Advertisement
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Smart Home

what they are, types, advantages, disadvantages and models from 180 euros

Avatar of Thomas Grimm

Published

on

at the time of produce our own electricity at home Typically, we think of photovoltaic solar panels or panels, a technology that takes advantage of the sunlight to feed our equipment and appliances with a relatively high initial cost if we want great power.

However, there is another option that is gaining more and more strength, especially if we have a single-family home, with a clear roof, garage, large terrace or with a small patio or garden at our disposal: domestic wind turbines. (more…)

Continue Reading

Smart Home

in which cases it is essential to bet on a top-of-the-range robot vacuum cleaner and in which not

Avatar of Thomas Grimm

Published

on

1675005162 840 560

Let’s go ahead that today the intelligent navigation essential for mapping has been democratized, so that we can find it not only in the high and medium range, but also in moderately affordable robot vacuum cleaners (even under 200 euros). But either by investing the minimum essential in this autonomous broom substitute or because we do not want a robot vacuum cleaner to draw maps of our house under any circumstances, there are those who choose to do without this feature. Buy a robot vacuum cleaner with or without mapping?

why map

Lets start by the beginning. Mapping consists of the fact that the device has the Technologys that allow it to deduce what the environment will be like to sketch a map. The direct consequence is that you can draw meaningful navigation paths (the logical thing to do is to sweep by rooms, not start sweeping part of the kitchen, leave it halfway and go with the living room), so you make sure that covers the entire* area with just enough passes.

And that asterisk in “everything”? The reality is that there are obstacles such as cables, pots, feeders, legs and cracks that the vacuum cleaner does not pass through, either because it is physically impossible for it to fit or because its algorithm determines that it does not fit (generally when it has little clearance).

That it does not go too far is important, firstly because it optimizes its operation and the long useful life of its components, secondly because thanks to not wasting resources, it can cover and clean more space. Finally, because if you are at home, listening to the robot vacuum cleaner in full action is a drag. Better clean up as soon as possible.

The normal thing with a robot that maps is that you can view the map in the app and that also brings benefits. Thus, there are quite a few models that offer a color graph that distinguishes the areas that have been cleaned from those that have not, ideal for you to take note and remove some elements that make navigation difficult.

But the great advantage of mapping has to do with partial cleanings. Yes, you can resort to the classic and ancient virtual barrier (an element that simulates a virtual limit for the device) or proceed to the bravest taking the vacuum cleaner in your arms, drop it in a room and close the door to clean, but if your kitchen is dirty after preparing food or your bathroom has turned into a post-apocalyptic place after your child has showered and cleaned up, the ideal is to go to the phone, open the application, select which area or room you want it to clean and let the action begin. In a few minutes and without further need for your intervention, the floor of the area would be clean again.


In any case, if a robot maps it is because it has some kind of intelligent navigation system that will help you move better than without it, allowing for more effective cleaning, minimizing the chance of getting lost and also getting stuck around. That he does not clean a part of the house is a problem, that he pulls the cord of the lamp, throws it on the floor and breaks it is a chore.

Not related to mapping, but to note: models without mapping are entry-levelwhich generally implies more rudimentary handling (perhaps manual and remote controlled) and basic cleaning Technologys (don’t expect special rubber center rollers for pets).

Best price-quality robot vacuum cleaners: which one to buy based on use and six recommended models

Advertisement

How robot vacuum cleaners navigate

The state of the art of robot vacuum navigation. As we anticipated in the intro, nowadays finding smart mapping and navigation is not only unusual, but the exception are models that do not map. But there are mappings and mappings.

The highest range of robot vacuum cleaners is mostly taken over by models with a multi-navigation system with a laser sight and a front camera which, in addition to allowing maps, serve to recognize objects. Map and objects usually appear in the application, so that we know what problematic things are on our floor. Under the hood, a processor, algorithms and even artificial intelligence to make decisions: ignore it and try to go over it or avoid it.

This is essential because that way you can avoid what was Worst cleaning day of my life: that fateful date when Lola felt unwell, she planted a pine tree in the corridor, the Roomba ran over it while cleaning and you can imagine the rest. Cleaning the floor of the house of excrement is not a pleasant dish, but having to disassemble your vacuum cleaner and waste time removing splinters… for me it stays.

Stole

The Roborock S7 MaxV Ultra has it “everything”: laser sight and front camera

Then there are models that they either just have a laser sight or a camera (although iRobot bets only on a camera placed on the front for mapping, navigation and recognition of objects in models like the Roomba J7 +). These models are more than enough for domestic mapping and optimized navigation, although to avoid accidents and loss it is best to leave the house as clear as possible.

And we close with the non-mapping. These robot vacuum cleaners have a combination of mechanical pressure sensors to detect contact with walls, infrared sensors to measure the distance to obstacles, optical sensors similar to those of mice to analyze movement, and fall-prevention light sensors that detect steps and unevenness. How do they navigate? Like you would if you were blindfolded and released into a room: with moderate caution and touching everything. The bonus is that they must also try to cover the entire area, so navigating randomly means taking a few more detours and turns.

Do I map yes or do I map no?

The good thing about robot vacuum cleaners is that they clean moderately well for you, which depends on their suction capacity, the quality of their brushes, that they are capable of covering the maximum space in your house and that they have a battery to do so.

Are you concerned about privacy? Here are two recommendations: see how the manufacturer manages this data related to our architecture and its objects (essentially, if they stay on the device or if they go to a server, if there is data encryption) and the premise that Although on paper there are protection systems, logically there is always some risk. The second is to weigh this fear against what you earn.

Screenshot 2023 01 29 At 13 24 09

Roborock S7 MaxV application interface

When is it essential to have mapping? If you have a large house and/or with several floors, you want to do partial cleaning or you simply expect the best results from a vacuum cleaner, then your thing is to bet on efficient navigation. No matter how much battery a robot with random navigation has, it is highly difficult for it to clean a large floor well and it is not so much a question of size as of obstacles: it can already have autonomy of 300 minutes, which if it gets stuck at minute 7, it will not be able. Another thing is that you have a completely clear ship.

Ok, but I still want to spend as little as possible, Is a robot vacuum cleaner without mapping worth it? Obviously having a robot vacuum cleaner is better than nothing and its effectiveness can be acceptable if we are clear about its limitations. In any case, it can be a good option if your budget is just over 100 euros, you have a small and/or sparsely furnished house that you agree to leave uncluttered, or you simply want an extremely basic model without connectivity (an example : to give it to your grandmother and she can control it with a remote).

Advertisement

Continue Reading

Smart Home

the first approach to the big screen

Avatar of Thomas Grimm

Published

on

1675003548 840 560

After decades of making use of cathode ray tube televisions, several manufacturers began to launch televisions on the market that were considerably thinner and with a novel panel technology. We are talking about plasma televisions, which ended up revolutionizing the industry. It must also be said that there was such a powerful marketing campaign around this new technology that even today you can find people thinking that they are still the ones that offer the best image quality.

And it is that the manufacturers of TVs made sure that when someone talked about plasma TVs, they were talking about a product synonymous with quality and high-end. For a while it was like that because the evolution compared to the old CRT was considerable. In this article we wanted to pay tribute to this type of television, mentioning its origins, what its technology consisted of, and its successors.

It took decades to see the first plasma television

Although the plasma display was developed in the 1960s for the PLATO (Programmed Logic for Automated Teaching Operations) computer system by a group of researchers from the University of Illinois, it was not until the late 1990s that to commercialize televisions with this technology. During all that time there were monochrome screens (orange, green or yellow), very popular for their hardness and because they detached from elements such as memory or circuits to update the image.


Image: Wikipedia

In 1973, IBM developed an 11-inch monochrome display with this technology, accompanying the IBM 3270 computer and making it capable of displaying up to four terminal sessions at once.

The Plasmaco company, founded in 1983, also played an essential role in the development of this technology. In fact, it was acquired in 1996 by Matsushita Electric Industrial, who in 1983 launched the Executive Partner, its first computer with plasma screen. The latter is known today as Panasonic, one of the companies that has most promoted plasma technology.

2023 is going to be a spectacular year in televisions: this is what the main manufacturers are preparing

When Pioneer launched the first plasma television to the public in 1997, the technology began to catch on in a big way, promising larger screens and better image quality and brightness.

Much larger panels with higher image quality

The plasma television has a set of small cells located between two glass panels. These contain a mixture of noble gases (neon, argon and xenon) that after charging the electrodes creates a voltage difference between the rear and front, causing the gas to become ionized and change its state to plasma. After this process, the ions of the gas move towards the electrodes, where they collide and generate photons, thus causing the emission of light.

plasma

Image: LCD Repair

This technology allowed to manufacture televisions with much more brightness than tube TVs. In addition, they were popular given their larger size, since in the market we could find plasma televisions larger than 70 inches.

Advertisement

In terms of image quality, it was an incredibly noticeable leap, with a greater color gamut and deeper blacks than LCDs, given its low luminescence. However, they were televisions that got too hot, being unpleasant for the user in the case of spending long hours with the television on. In fact, as with OLEDs, in plasma televisions there was also the fear of burning the panel.

Plasma

In the market we could find all kinds of plasma models of different sizes. Manufacturers such as Pioneer, Panasonic, LG, or Samsung, among many others, showed the world the capabilities of this technology in televisions, which became very popular, although yes, significantly more expensive than CRT TVs.

The price and its stagnation buried this technology

The price disadvantage, and the need for the panel to have a large diagonal for its manufacture, meant that the plasma television became part of a highly concentrated market. Secondly, LCD technology kept growing. And it is that although the first LCD televisions were notably inferior to plasma, little by little they were conquering the public, eventually tackling the problems of dead pixels or ghosting of the first generations.

During the last years of life, the plasma barely reached 5% of the market sharein a context in which brands such as Samsung or LG dominated the market for flat screens with LCD technology.

In 2014, most plasma TV manufacturers finally abandoned the technology, although it ceased to be relevant several years earlier. However, it will always be remembered as one of the Technologys that most helped advance the image quality of televisions.

Continue Reading

Trending