Connect with us

Hot and How?

ELSA Erazor X: Inno3D has already presented the GeForce RTX 4070 Ti

Avatar of Thomas Grimm



article 1280x720.b1867f4e jpg

The graphics card manufacturer Inno3D, which operates under the umbrella of the PC Partner Group, which also includes Zotac and Manli, has not adhered to Nvidia’s embargo and has already officially presented its GeForce RTX 4070 Ti. With ELSA, the company relies on a historic brand name for this.

Inno3D preempts Nvidia

The Hong Kong-based company InnoVISION Multimedia – Inno3D for short – has preempted the official presentation of the GeForce RTX 4070 Ti by Nvidia, formerly intended as the GeForce RTX 4080 12 GB, and has the first custom design, which is known in Asia as the ELSA GeForce RTX 4070 Ti Erazor X is already presented.

Custom design with OC and dual slot

The official product page, which was obviously released a little too early, only gives a few details so far:

ELSA GeForce RTX 4070 Ti Erazor X
  • Factory overclocking
  • 2 slot high cooling solution
  • Triple fan cooling with 3× 90 mm
  • Aluminum back plate

As can be seen briefly on the product page, the graphics card otherwise offers mostly standard fare.

In addition to an unspecified factory OC, which is usually in the single-digit percentage range, a total of 3× DisplayPort 1.4a and 1× HDMI 2.1 are offered on the I/O shield. The custom design is kept simple and does not use excessive RGB lighting.

ELSA hasn’t been ELSA for a long time

Inno3D uses long-established names for both the brand name and the product name. The originally well-known ELSA AG from Aachen was a German manufacturer of graphics cards, monitors and modems that had to file for bankruptcy in 2002.

All rights to the name are now owned by the Taiwan-based IT company ELSA Technology, which sells the trademarks for license fees.

The name “ELSA Erazor”, which was already used in the mid-1990s for graphics cards such as the “ELSA Victory Erazor” and “ELSA Victory Erazor II” based on Nvidia Riva, is still part of the Chinese company’s name portfolio.

With the ELSA GeForce RTX 2080 Erazor, Inno3D brought the brand name back in 2018 and later also offered an ELSA GeForce RTX 3080 Ti Erazor.

Zotac and Coloful also have the 4070 Ti ready to go

Like the site VideoCardz reports, Zotac and Colorful are also putting their custom designs in position.

Zotac AMP Extreme Airo, X-Gaming and X-Gaming OC (Image: VideoCardz)

The Zotac GeForce RTX 4070 Ti AMP Extreme Airo, which has a boost of 2.7 GHz and a TDP of 366 watts with OC-BIOS, can particularly stand out, while most custom models stick to the 285 watt TDP specified by Nvidia will hold.

GeForce RTX 4070 Ti will be released at CES 2023

The presentation of the Nvidia GeForce RTX 4070 Ti, which no longer holds any surprises, is expected to take place tomorrow as part of the GeForce Beyond Keynote at CES 2023. The so far smallest graphics card from the Nvidia Ada Lovelace generation should therefore cost 799 US dollars. January 5th has been in the room for a long time as the official start of sales.

Hot and How?

The best contents of the week in MuyPymes

Avatar of Thomas Grimm



Los mejores contenidos de la semana en MuyPymes 1

As every Sunday we end the week with a new review of the best content that we have published in MuyPymes. This compilation will allow you to find the most important information of the last seven days just one click away. Have a good Monday.

  • How Digital Transformation enables the four-day work week.
  • Production with robots would be paralyzed for weeks, in the event of a cyber attack.
  • These are the main novelties that the self-employed will face in the next two years.
  • Renting Finders joins the Lanzadera program.
  • How do I know if I’m eligible for Windows 11?
  • Cybercriminals are using OneNote to spread malware.
  • 85% of Spanish workers will not ask for a salary increase this year.
  • 70% of Spanish managers avoid the mental health problems of their teams.
  • What future does face-to-face events hold: the opinion of the expert.
  • The Christmas campaign closed with an increase in online purchases of 13%.
  • Four reasons why consumers opt for chatbots.
  • Google for Startups creates a specialized cybersecurity program.
  • Samsung will launch the new Galaxy Book3 on February 1.
  • Canon reinforces its digital services thanks to its Document Services Hub.
  • 86% of users will prefer pay-as-you-go over long-term licenses.
  • Digital workers do not want to return to the office: 80% would leave the job.
  • Four out of 10 self-employed expect a drop in activity due to inflation.
  • NVIDIA launches new Studio Drivers drivers, we review their keys.
  • Sony introduces new Crystal LED BH and CH series monitors.
  • Epson and Yuima Nakazato together for a sustainable future in the world of fashion.
  • AOC launches its new range of P3 monitors for professionals.
  • New NUC with Intel Alder Lake-N CPU, powerful and compact.
  • Acer launches a 16-inch ultraportable with 4K resolution.

The entry The best content of the week in MuyPymes is original from MuyPymes

Continue Reading

Hot and How?

The most frequent problems regarding time control

Avatar of Thomas Grimm



clock 3410034 1280

As indicated from Woffu, time control managementIn addition to being a legal necessity, it is one of the main headaches for HR managers. The company highlights the main difficulties when it comes to managing the presence and absence of workers and how to solve them.

Waste of time solving incidents

One of the main problems that HR managers encounter is the time invested in solving incidents caused by disconnected tools, which do not have the technology to integrate vacations and absences with the presence in the same tool.

Many companies manage absence requests by email, paper or Excel sheets, for example, which do not allow them to attach supporting documents. In this way, as they point out from Woffu “team leaders waste hours and hours searching for and requesting receipts, reviewing who is working and who is not available. This prevents them from focusing on valuable tasks.”

Non-digitized HR processes

In the same way, one of the obstacles in the management of time control is the lack of digitization. Since the Time Control Law does not specify whether it must be done with a tool designed for it, there are many companies that choose for continuing to register on paper or in Excel sheets. “Companies waste a lot of time by manually recording the hours worked and the reasons for absence, in addition to the fact that the margin of error is greater and the data obtained is not reliable”, They comment from Woffu.

In addition, in many companies, the tools used do not allow managing the signing of a hybrid work model or a work model only remotely. Therefore, by not having this digitization, the company lacks data and information that helps to understand its reality, such as the absenteeism rate, departments that telework the most, etc.

Warning, scroll to continue reading

Lack of visibility of the days of absence and presence

Another of the common problems is that the company usually lacks visibility of the days of absence and presence of employees or between teams. This translates into a waste of time asking or searching emails or notifications for the availability of the rest of the team. Related to that lack of visibility is the fact that employees may believe that their overtime is not being recorded. This leads to disgruntled and distrustful employees.

Tools that do not meet the needs

It may happen that HR software has been hired, but when employees and managers use it to record the workday, or to request medical hours, the tool does not meet usability standards. Or it does not allow a real-time connection with visualization on any device. In this case, it is best to test the tool before entering into a deal. Make sure that it is user friendly and that it responds to the needs of both employees and HR managers. We must try to make the use of the labor registration tool as easy and bearable as possible, so it will be possible to ensure its daily use and full adoption by the workforce.

Time Control Law

Despite the fact that it has been more than four years since the implementation of the Control Law, it is still an aspect of business management that continues to generate controversy and controversy. In fact, according to data published by Grupo SPEC, half of the companies would not pass an inspection by the hourly register three years after the law. In fact, from September 2019 to May 2022, inspectors have detected a total of 3,299 violations in the registration of working hours throughout Spain and have imposed a total of 4.7 million euros in fines.

Continue Reading

Hot and How?

Acer launches a 16-inch ultraportable with 4K resolution

Avatar of Thomas Grimm




The new Acer Swift Edge is presented as a new high-performance ultraportable, and despite everything it maintains a very contained weight. This computer comes configured with a Ryzen 7 Pro 6850U APU, a chip that can be configured with a Zen 3+ CPU and a Radeon 680M GPU based on RDNA2 architecture. The processor has 8 cores and 16 threads at 2.7 GHz base frequency and 4.7 GHz speed in turbo mode, and the GPU has 768 shaders.

Despite being a low power solution, that APU is capable of delivering an excellent level of performance, and its integrated GPU can outperform dedicated solutions like the NVIDIA MX450so it’s a really interesting APU. The memory configuration that Acer has used in this equipment impresses, since we have a total of 16 GB of LPDDR5 memory at 6,400 MHz in the most powerful version, which translates into high bandwidth.

The screen of the Acer Swift Edge is 16 inches, you can mount a OLED panel with 4K resolution capable of reproducing 100% of the DCI-P3 color space and is TUV RHEINLAND certified, indicating both high quality color reproduction and low blue light emissions. The rest of its specifications are completed with a 1 TB M.2 SSD with PCIe 4.0 x4 interface, Wi-Fi 6E and Bluetooth 5.2 connectivity and a FullHD webcam.

The range of connectors that the Acer Swift Edge brings is up to the equipment, and we can highlight the presence of two USB 4 connectors, two USB 3.2 Gen 1 Type-A, a 3.5 mm jack and an HDMI output. In its base configuration, this equipment weighs only 1.17 kilograms, its chassis is made of a magnesium aluminum alloy and offers a range of up to 7 and a half hours for each battery charge. Its price will be 1,200 euros in its base configuration.

Warning, scroll to continue reading

Continue Reading